ELECTRICAL IGNITER CABLE

Listed below are suggested high resistance wires for use in making electrical firing systems. General recommendations are that the wires used for ignition need a to have a resistance range of 650 to 875 ohms/cmf, with the higher end of the range being the best suited. Melt point of the wire needs to be in the range of 1100-1500° C.

  Composition

Resistance
(ohms/cmf)

Melt Point
(°C)
Also Known As
EvanOhm 75% Nickel,
20% Chrome
2.5% Aluminum
1.7% Copper
800 1400° C Alloy 800, Stablohm 800, Nikrothal LX, Chromel R, Karma, Evanohm, Evenohm, Evanohm R, Evenohm R, HAI-431, Moleculoy, 800 Alloy.
NiCr 80

80% Nickel
20% Chrome

650 1200° C Chromel A, Nikrothal 80, N8, Nichrome V, HAI-NiCr 80, Tophet A, Resistohm 80, Cronix 80, Protoloy, Nikrothal 8, Alloy A, MWS-650, Stablohm 650

NiCr 60

60% Nickel
16% Chrome
24% Iron

675 1390° C Chromel C, Nikrothal 60, N6, HAI-NiCr 60, Tophet C, Resistohm 60, Cronifer II, Electroloy, Nichrome, Alloy C, Nikrothal 6, MWS-675, Stablohm 675
Alloy 815 22% Chrome
73.2% Iron
4.8% Aluminum
815 1500° C Kanthal D, Kanthal, Alloy 815, Alchrome DK, Alferon 901, Resistohm 135, Aluchrom 5, Stablohm 812
Alloy 837 22% Chrome
72.7% Iron
5.3% Aluminum
836 1500° C Kanthal AF, Resistohm Y, Aluchrom Y, Alloy 837
Alloy 875 22% Chrome
72.2% Iron
5.8% Aluminum
875 1500° C

Kanthal A1, Kanthal, Alloy 875, Resistohm 145, Aluchrom 0, Alchrome 875, MWS-875, Stablohm 875